SCREWDRIVERS (TORX)

TORX, developed by Camcar LLC of Acument Global Technologies of U.S., is the trademark for a type of screw head characterized by a 6-point star-shaped pattern. By design, TORX head screws resist cam-out better than Phillips head or Slot head screws. Where Phillips heads were designed to cause the driver to cam out, to prevent over-tightening, TORX heads were designed to prevent it. The TORX drive system was developed in the Camcar Technical center, located in Rockford, Illinois. PTL Torx screwdrivers are designed as per original torx standards and handle design is same as mentioned earlier.
 

Product No.

Blade Size DiaxLength (mm)

Standard Packing In Boxes

Standard Packing in Cartons

PTL - T-5

 3 x 75 20 Pcs. 1000 Pcs.

PTL - T5-L

 3 x 150 20 Pcs. 1000 Pcs.

PTL - T-6

 3 x 75 20 Pcs. 1000 Pcs.

PTL - T6-L

 3 x 150 20 Pcs. 1000 Pcs.

PTL - T-8

 3.25 x 75 20 Pcs. 1000 Pcs.

PTL - T8-L

 3.25 x 150 20 Pcs. 1000 Pcs.

PTL - T-10

 3.25 x 75 20 Pcs. 1000 Pcs.

PTL - T10-L

 3.25 x 150 20 Pcs. 1000 Pcs.

PTL - T-15

 5 x 75 20 Pcs. 500 Pcs.

PTL - T15-L

 5 x 150 20 Pcs. 500 Pcs.

PTL - T-20

 5 x 100 20 Pcs. 500 Pcs.

PTL - T20-L

 5 x 200 20 Pcs. 400 Pcs.
PTL - T-25 6 x 100 20 Pcs. 500 Pcs.
PTL - T25-L 6 x 200 20 Pcs. 400 Pcs.
PTL - T-30 6 x 100 20 Pcs. 500 Pcs.
PTL - T30-L 6 x 200 20 Pcs. 400 Pcs.
PTL - T-40 8 x 125 10 Pcs. 200 Pcs.
PTL - T40-L 8 x 200 10 Pcs. 200 Pcs.